Status Help

The Status page displays the system's current status and configuration. All information is read-only.

Wired - The following is the information of Wired LAN. You can configure them in the Network page.

• MAC Address - The physical address of the system, as seen from the LAN.
• IP Address - The IP address of the wired LAN.
• Subnet Mask - The subnet mask associated with IP address.

Wireless - These are the current settings or information for Wireless. You can configure them in the Wireless -> Wireless Settings page.

• Operation Mode - Indicates the mode which the AP is working on. "Disable" means the wireless radio has been turned off.
• Wireless Name of Root(Remote) AP - The SSID of the Root(Remote) AP.
• Wireless Network Name/Local Wireless Name - The SSID of the AP.
• Channel - The current wireless channel in use.
• Mode - The current wireless mode which the AP works on.
• Channel Width - The bandwidth of the wireless channel.
• Max Tx Rate - The maximum tx rate.
• MAC Address - The physical address of the AP, as seen from the WLAN.

Traffic Statistics - The system traffic statistics.

• Sent (Bytes) - Traffic that counted in bytes has been sent out from WLAN.
• Sent (Packets) - Traffic that counted in packets has been sent out from WLAN.
• Received (Bytes) - Traffic that counted in bytes has been received from WLAN.
• Received (Packets) - Traffic that counted in packets has been received from WLAN.

System Up Time - The length of the time since the AP was last powered on or reset.

Click the Refresh button to get the latest status and settings of the AP.