System Status Help

The Status page displays the system's current status and configuration. All information is read-only.

Wired: The following is the information of Wired LAN, as set on the Network page.

• MAC Address - The physical address of the system, as seen from the wired LAN.
• IP Address - The IP address of the wired LAN.
• Subnet Mask - The subnet mask associated with IP address.

Wireless: These are the current settings or information for Wireless, as set on the Wireless -> Basic Settings page.

• Wireless Radio - Indicates whether the wireless radio feature of the system is enabled or disabled.
• Operating Mode - Displays the operating mode of AP if wireless radio is enabled.
• SSID - SSID of the system.
• Signal - Received signal of remote AP.
• Remote MAC - Mac address of remote AP.
• Channel - The current channel in use.
• Mode - Indicates the current mode (54Mbps (802.11g), 11Mbps (802.11b)). 54Mbps (802.11g) is compatible with 11Mbps (802.11b).
• MAC Address - The physical address of the system, as seen from the WLAN.
• IP Address - Wireless IP address of WLAN.

Traffic Statistics: The system traffic statistics.

• Bytes - The sum of bytes have been sent out or received from WLAN.
• Packets -The sum of packets have been sent out or received from WLAN.

System Up Time: The time of the system running from it's powered on or reset.

Click the Refresh button to get the latest status and settings of the system.