General

Enable Application Optimized Routing Enable Bandwidth Based Balance Routing

Note:
1.	To make "Bandwidth Based Balance Routing" take effect, please first configure WAN bandwidth on "Network"->"WAN" page.
2.	The WAN port traffic ratio will be equal to the preset bandwidth ratio of each WAN port after "Bandwidth Based Balance Routing" of the port is enabled.
3.	If the bandwidth ratio of WAN1 and WAN2 is set as 2:1, the traffic ratio of WAN1 and WAN2 will approximate 2:1 after "Bandwidth Based Balance Routing" of WAN1 and WAN2 is enabled.
4.	"Bandwidth Based Balance Routing" cannot be applied to the secondary connection of dual-access.