Wireless -- Advanced

This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate,set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point and set whether short or long preambles are used. Click "Save/Apply" to configure the advanced wireless options.

Band:	2.4GHz
Channel:	Auto12345678910111213	Current: 10 (interference: acceptable)
Auto Channel Timer(min)

802.11n/EWC:	Auto Disabled
Mode:	11b11g11bg11bgn11n only

Bandwidth:	Auto 20MHz 40MHz	Current: 20MHz
Control Sideband:	Lower Upper	Current: N/A
802.11n Rate:	AutoUse 54g Rate 0: 6.5 Mbps or 13.5 Mbps 1: 13 Mbps or 27 Mbps 2: 19.5 Mbps or 40.5 Mbps 3: 26 Mbps or 54 Mbps 4: 39 Mbps or 81 Mbps 5: 52 Mbps or 108 Mbps 6: 58.5 Mbps or 121.5 Mbps 7: 65 Mbps or 135 Mbps 8: 13 Mbps or 27 Mbps 9: 26 Mbps or 54 Mbps10: 39 Mbps or 81 Mbps11: 52 Mbps or 108 Mbps12: 78 Mbps or 162 Mbps13: 104 Mbps or 216 Mbps14: 117 Mbps or 243 Mbps15: 130 Mbps or 270 Mbps
802.11n Protection:	Off Auto
Support 802.11n Client Only:	Off On

54g™ Rate:	1 Mbps2 Mbps5.5 Mbps6 Mbps9 Mbps11 Mbps12 Mbps18 Mbps24 Mbps36 Mbps48 Mbps54 Mbps
Multicast Rate:	Auto1 Mbps2 Mbps5.5 Mbps6 Mbps9 Mbps11 Mbps12 Mbps18 Mbps24 Mbps36 Mbps48 Mbps54 Mbps
Basic Rate:	DefaultAll1 & 2 Mbps1 & 2 & 5.5 & 6 & 11 & 12 & 24 Mbps
Fragmentation Threshold:
RTS Threshold:
DTIM Interval:
Beacon Interval:
Global Max Clients:
XPress™ Technology:	Disabled Enabled

54g™ Mode:	54g Auto 54g Performance 54g LRS 802.11b Only 802.11g Only
54g™ Protection:	Off Auto

Regulatory Mode:	Disabled 802.11h 802.11d
Pre-Network Radar Check:
In-Network Radar Check:
TPC Mitigation(db):	0(off) 2 3 4

Afterburner Technology:

Disabled Enabled

(Disable WMM for Selection)

Preamble Type:

long short

Transmit Power:

20% 40% 60% 80% 100%

WMM(Wi-Fi Multimedia):

Auto Disabled Enabled

WMM No Acknowledgement:

Disabled Enabled

WMM APSD:

Disabled Enabled

Iperf Support:	Disable Enable
Video Error Correction:	RX Auto Enable Decode RX Disable Decode TX Enable Sequencer TX Enable Sequencer (IPTV Mode) TX Enable Encode TX Enable Encode (IPTV Mode)