Add Network Traffic Class Rule

This screen creates a traffic class rule to classify the ingress traffic into a priority queue and optionally mark the DSCP or Ethernet priority of the packet.
Click 'Save/Apply' to save and activate the rule.

Traffic Class Name:

Rule Order:

Rule Status:

Specify Classification Criteria (A blank criterion indicates it is not used for classification.)

Class Interface:

Ether Type:

Ether Type:

Source MAC Address:

Destination MAC Address:

Destination IP Address:

Differentiated Service Code Point (DSCP) Check:

Protocol:

Protocol:

UDP/TCP Source Port (port or port:port):

UDP/TCP Destination Port (port or port:port):

802.1p Priority Check:

Specify Classification Results (A blank value indicates no operation.)

Specify Class Queue (Required):

- Packets classified into a queue that exit through an interface for which the queue
is not specified to exist, will instead egress to the default queue on the interface.

Specify Class Policer:

Mark Differentiated Service Code Point (DSCP):

Mark 802.1p priority:

- Class non-vlan packets egress to a non-vlan interface will be tagged with VID 0 and the class rule p-bits.
- Class vlan packets egress to a non-vlan interface will have the packet p-bits re-marked by the class rule p-bits. No additional vlan tag is added.
- Class non-vlan packets egress to a vlan interface will be tagged with the interface VID and the class rule p-bits.
- Class vlan packets egress to a vlan interface will be additionally tagged with the packet VID, and the class rule p-bits.

Traffic Class Name:
Rule Order:
Rule Status:

Specify Classification Criteria (A blank criterion indicates it is not used for classification.)

UDP/TCP Source Port (port or port:port):
UDP/TCP Destination Port (port or port:port):