Mode Selection
Provides Internet access for multiple wired and wireless devices simultaneously.
Transforms your existing wired network to a wireless network.
Extends your existing wireless coverage by repeating the wireless signal.
Congratulations! Network setup successfully. Enjoy the Internet.
Register a new account
For more TP-Link Cloud functions, please login with your TP-Link Cloud Account.
With a TP-Link Cloud account, you can:
- Access your device and local servers (FTP, HTTP, etc.) anywhere via the Internet
- Always keep your firmware up to date with the Online Upgrade function
- Manage multiple devices with only one account
No TP-Link Cloud account?
Failed.
Oops... The Internet connection is not set up successfully.1. Make sure all cables are properly connected.
2. Click Back and verify that the Internet connection information is correct.
3. Contact our Technical Support if the problem still exists.
Congratulations!
You have completed the Quick Setup process.
Click Test Internet Connection below, then click Finish.
5GHz Host Network
6GHz Host Network
2.4GHz Host Network
Wireless Settings
Relocate
Join OneMesh to copy the router's wireless settings for seamless roaming. If you want to customize wireless settings, deselect the checkbox. Learn More
Set the extended network names (SSIDs).
:
:
(Same as your host network password)
:
:
(Same as your host network password)
:
:
(Same as your host network password)
Rebooting to apply settings...
Please wait.
0%
Note:
- After the process bar is finished, the configuration is successful.If you want to manage the extender, please make sure your device is connected to the extender and refresh the management page.
Relocate your extender to optimize Wi-Fi coverage and performance.
- Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of the host network.
- Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't, relocate the extender closer to the router to achieve better signal quality.
- Make sure the Signal LED turns solid on. LED not on?
- Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of the host network.
- Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't, relocate the extender closer to the router to achieve better signal quality.
All done! Now, enjoy seamless roaming in the mesh network.
2.4GHz Extended Network
5GHz Extended Network
6GHz Extended Network
No Host Network Connection
- Verify your host network credentials. If they are incorrect, start over the setup.
- Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
- If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them and try again.
- Retry connecting, or try setting up via the WPS button.
- If you are still having problems, visit http://www.tp-link.com/support-contact for technical support.