Guest Network Wireless Settings
Access And Bandwidth Control
Allow Guest To Access My Local Network:
Enable Guest Network Bandwidth Control:
Egress Bandwidth For Guest Network:	Kbps
Ingress Bandwidth For Guest Network:	Kbps
Wireless 2.4GHz
Guest Network (2.4G):	Note:You should turn on the WiFi switch or enable the 2.4GHz Band on Dual Band Selection!
Network Name:	(Also called the SSID)
Wireless Security:	Disable Security WPA/WPA2-Personal
Version:	Automatic(Recommended) WPA-PSK WPA2-PSK
Encryption:	AES
PSK Password:
	(You can enter ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64.)
Group Key Update Period:	Seconds (Keep it default if you are not sure, minimum is 30, 0 means no update)
	We do not recommend using the TKIP encryption if the device operates in 802.11n mode due to the fact that TKIP is not supported by 802.11n specification.
Access Time:	Timeout Schedule
	Hours   Minutes
	Everyday    Select Days
	Mon  Tue  Wed  Thu  Fri  Sat  Sun
	All day-24 Hours
	Start Time:  (HHMM)
	End Time:   (HHMM)
Wireless 5GHz
Guest Network (5G):	Note:You should turn on the WiFi switch or enable the 5GHz Band on Dual Band Selection!
Network Name:	(Also called the SSID)
Wireless Security:	Disable Security WPA/WPA2-Personal
Version:	Automatic(Recommended) WPA-PSK WPA2-PSK
Encryption:	AES
PSK Password:
	(You can enter ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64.)
Group Key Update Period:	Seconds (Keep it default if you are not sure, minimum is 30, 0 means no update)
	We do not recommend using the TKIP encryption if the device operates in 802.11n mode due to the fact that TKIP is not supported by 802.11n specification.
Access Time:	Timeout Schedule
	Hours   Minutes
	Everyday    Select Days
	Mon  Tue  Wed  Thu  Fri  Sat  Sun
	All day-24 Hours
	Start Time:  (HHMM)
	End Time:   (HHMM)